In this guide
THE SHORT ANSWER
The essentials.
This setup combines a 500-litre tank, DI filtration and a manual hose reel for one operator. Check your incoming water, daily consumption and available vehicle payload before deciding whether it suits your round.
GUIDE / 01
What the 500L DI configuration combines
This one-operator arrangement brings together a 500-litre tank, DI water treatment and a manually wound hose reel. It is intended to store and deliver water for a compatible water-fed pole setup.
The tank capacity tells you how much water can be carried. It does not establish how long the system will last on a round or whether the vehicle can carry the complete load.
Listed component | 500L DI manual-reel configuration |
|---|---|
Treatment | 11L DI resin vessel with quick-release arrangement |
Delivery pump | 100PSI 12V Aquatec |
Controller | V16 Spring digital controller |
Structure | Stainless-steel frame and door |
Listed dimensions | 122cm wide × 144cm long × 97cm high |
These details identify the listed configuration. Confirm the selected hose, battery, charging and accessories in the final order specification.
GUIDE / 02
Decide whether DI suits your water supply
DI resin removes dissolved ions from the feed water. Its useful life depends on incoming water quality and the volume treated. Measure the supply and compare likely resin use before choosing DI as your only treatment stage.
If dissolved-solids levels and consumption make resin costs high, compare RO/DI. If you already obtain suitably purified water elsewhere, compare a delivery-only configuration instead.
The RO and DI guide explains the trade-offs without treating water hardness as the only deciding factor.
GUIDE / 03
Plan capacity, payload and access
- Record your water use over representative working days.
- Allow approximately 500kg for 500 litres of water, plus the tank, equipment and other vehicle loads.
- Check mounting, door access and space for maintenance.
- Leave a clear hose route and enough room to operate the manual handle.
Vehicle model name alone is not enough to confirm suitability. Use the exact vehicle limits and an appropriate installation assessment.
GUIDE / 04
Check the reel and the full specification
A manual reel keeps retrieval under hand control. Check left- or right-hand winding, hose length and diameter, fittings and the intended mounting position. Consider how often you retrieve hose during the day, not only the longest run.
Before ordering, review the current product configuration for pump, controller, electrical supply, filtration, hose and accessory inclusions. Confirm whether delivery or installation is included in the selected arrangement.
GUIDE / 05
Keep the setup ready for work
Monitor final water quality, inspect connections and check the hose as you rewind it. Replace resin when the output no longer meets the required performance, following the equipment instructions.
The system needs the same attention to cleanliness, frost protection and scheduled servicing as any other water-fed setup. See the setup and commissioning guide for the planning sequence.
YOUR QUESTIONS, ANSWERED
Questions and answers
Will 500 litres last a full day?
That depends on actual flow, cleaning time, technique and the number of operators. Measure consumption rather than relying on a fixed number of hours.
Is DI only suitable for soft-water areas?
DI can treat a range of supplies, but resin consumption changes with dissolved-solids levels and volume. Compare operating costs for your supply.
Can I add an electric reel later?
Ask the supplier to confirm the mounting, electrical and component changes for your exact system. Do not assume a universal conversion kit exists.

PUT THE ADVICE TO WORK
Make the right choice for your setup.
Compare the current options and specifications, then talk to the Waterworks team if you need help matching equipment to your round.
Explore the equipment →FROM THE WATERWORKS TEAM
Practical equipment guides from Waterworks in Corby. For advice about your own configuration, contact the team.



